Eighteenth Day

Assalamualaikum...nice to see you again....

Today i continue with task IP camera. We change the setting on router configuration on IP address 192.168.0.1. This is gateway to access the internet. By using this gateway, we can access the configuration of the router. For this configuration, it will have username and password. For default username for D-link DIR-300, it will be admin and the password is blank. The log-in page of this configuration like this figure:

From this configuration, we can change the setting on the router. We can also block the web and allow the user from use this router. A lot of the configuration that we must have to set if we want not to allow people on this router. For changing the UPnP on this configuration, I check on Advanced setting on the Advanced Network. Click on enable UPnP to enable UPnP for configuration on IP camera. Save the setting of the router.

For check the status on router, go to the status and click on device info. It will display like figure below. It shown MAC address, IP address(gateway), subnet mask and DHCP server for LAN. It also shown for Internet configuration and the SSID for router.

If we let it about 15minute without using change anything, it will log-out automatically and we must log-in again. This figure shown when the configuration log-out automatically.

We also try to change the setting on DDNS and http to https(security) but I don't know how to change in http because the briefing with Mr.Hanafi, he only tell me about change the http. Each router have the differences setting on configuration. Sometime the easier to change and the difficult one. For DDNS setting, I don't know the username an password on dlink DNS. So, to change the configuration, I waiting for help on Mr.Hanafi or Mr.Ed Soffuan from Computer Center(department of communication and networking).

~Thanks For Reading Y^_^Y~